Material properties of EPDM rubber ring

EPDM EPDM rubber ring is a copolymer synthesized from ethylene and propylene. It is a third monomer, usually a ternary copolymer of diene. Provide rubber vulcanization, referred to as EPDM rubber ring. Generally, the material performance of EPDM rubber ring has excellent ozone resistance, sunlight resistance and weather resistance. It has good elasticity at low temperatures and good chemical resistance, such as many diluted acids, alkalis and polar solvents. In addition The electrical insulation properties are also good. The material properties of EPDM rubber ring are as follows:

The material performance of EPDM rubber ring conforms to the Japanese rubber ring specification standard JIS B 24013.China Custom Rubber Gaskets

The curing conditions are 170 degrees X15min.

The hardness Shore-A is equal to 70.

The tensile strength is equal to 14.2 MPA.

The elongation at break is equal to 520%.

The tear resistance type A is equal to 65 KGF/MM.

The low temperature brittleness temperature is equal to -45 degrees.

Compression set is equal to 20% compression rate.

The high and low temperature range is equal to -40 to 150 degrees.

The density is equal to 1.26 g/cm3.

100% tensile stress is equal to 3.0MPa.